Prerequisites

Hardware¶

Pi-hole is very lightweight and does not require much processing power

Min. 2GB free space, 4GB recommended
512MB RAM

Info

A Pi-hole branded kit, including everything you need to get started, can be purchased from The Pi Hut, here.

Despite the name, you are not limited to running Pi-hole on a Raspberry Pi. Any hardware that runs one of the supported operating systems will do!

Software¶

Pi-hole is supported on distributions utilizing systemd or sysvinit!

Supported Operating Systems¶

The following operating systems are officially supported:

Raspberry Pi OS (formerly Raspbian)
Armbian OS
Ubuntu
Debian
Fedora
CentOS Stream

Pi-hole only supports actively maintained versions of these systems.

Info

One of the first tasks the install script has is to determine your Operating System's compatibility with Pi-hole

It is possible that Pi-hole will install and run on variants of the above, but we cannot test them all. If you are using an operating system not on this list you may see the following message:

[✗] Unsupported OS detected: Debian 16
  If you are seeing this message and you do have a supported OS, please contact support.

  https://docs.pi-hole.net/main/prerequisites/#supported-operating-systems

  If you wish to attempt to continue anyway, you can try one of the following commands to skip this check:

  e.g: If you are seeing this message on a fresh install, you can run:
         curl -sSL https://install.pi-hole.net | sudo PIHOLE_SKIP_OS_CHECK=true bash

       If you are seeing this message after having run pihole -up:
         sudo PIHOLE_SKIP_OS_CHECK=true pihole -r
       (In this case, your previous run of pihole -up will have already updated the local repository)

  It is possible that the installation will still fail at this stage due to an unsupported configuration.
  If that is the case, you can feel free to ask the community on Discourse with the Community Help category:
  https://discourse.pi-hole.net/c/bugs-problems-issues/community-help/

You can disable this check by setting an environment variable named PIHOLE_SKIP_OS_CHECK to true, however Pi-hole may have issues installing. If you choose to use this environment variable, please use the Community Help topic on Discourse to troubleshoot any installation issues you may (or may not!) have.

IP Addressing¶

Pi-hole needs a static IP address to properly function (a DHCP reservation is just fine).

Ports¶

Service	Port	Protocol	Notes
pihole-FTL	53 (DNS)	TCP/UDP	If you happen to have another DNS server running, such as BIND, you will need to turn it off in order for Pi-hole to respond to DNS queries.
pihole-FTL	67 (DHCP)	IPv4 UDP	The DHCP server is an optional feature that requires additional ports.
pihole-FTL	547 (DHCPv6)	IPv6 UDP	The DHCP server is an optional feature that requires additional ports.
lighttpd	80 (HTTP)	TCP	If you have another Web server already running, such as Apache, Pi-hole's Web server will not work. You can either disable the other Web server or change the port on which `lighttpd` listens, which allows you keep both Web servers running.
pihole-FTL	4711	TCP	FTL is our API engine and uses port 4711 on the localhost interface. This port should not be accessible from any other interface.

Info

The use of lighttpd on port 80 is optional if you decide not to install the Web dashboard during installation. The use of pihole-FTL on ports 67 or 547 is optional, but required if you use the DHCP functions of Pi-hole.

Firewalls¶

Below are some examples of firewall rules that will need to be set on your Pi-hole server in order to use the functions available. These are only shown as guides, the actual commands used will be found with your distribution's documentation. Because Pi-hole was designed to work inside a local network, the following rules will block the traffic from the Internet for security reasons. 192.168.0.0/16 is the most common local network IP range for home users but it can be different in your case, for example other common local network IPs are 10.0.0.0/8 and 172.16.0.0/12.

Check your local network settings before applying these rules.

IPTables¶

IPTables uses two sets of tables. One set is for IPv4 chains, and the second is for IPv6 chains. If only IPv4 blocking is used for the Pi-hole installation, only apply the rules for IP4Tables. Full Stack (IPv4 and IPv6) require both sets of rules to be applied. Note: These examples insert the rules at the front of the chain. Please see your distribution's documentation for the exact proper command to use.

IPTables (IPv4)

iptables -I INPUT 1 -s 192.168.0.0/16 -p tcp -m tcp --dport 80 -j ACCEPT
iptables -I INPUT 1 -s 127.0.0.0/8 -p tcp -m tcp --dport 53 -j ACCEPT
iptables -I INPUT 1 -s 127.0.0.0/8 -p udp -m udp --dport 53 -j ACCEPT
iptables -I INPUT 1 -s 192.168.0.0/16 -p tcp -m tcp --dport 53 -j ACCEPT
iptables -I INPUT 1 -s 192.168.0.0/16 -p udp -m udp --dport 53 -j ACCEPT
iptables -I INPUT 1 -p udp --dport 67:68 --sport 67:68 -j ACCEPT
iptables -I INPUT 1 -p tcp -m tcp --dport 4711 -i lo -j ACCEPT
iptables -I INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT

IP6Tables (IPv6)

ip6tables -I INPUT -p udp -m udp --sport 546:547 --dport 546:547 -j ACCEPT
ip6tables -I INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT

FirewallD¶

Using the --permanent argument will ensure the firewall rules persist reboots. If only IPv4 blocking is used for the Pi-hole installation, the dhcpv6 service can be removed from the commands below. Create a new zone for the local interface (lo) for the pihole-FTL ports to ensure the API is only accessible locally. Finally --reload to have the new firewall configuration take effect immediately.

firewall-cmd --permanent --add-service=http --add-service=dns --add-service=dhcp --add-service=dhcpv6
firewall-cmd --permanent --new-zone=ftl
firewall-cmd --permanent --zone=ftl --add-interface=lo
firewall-cmd --permanent --zone=ftl --add-port=4711/tcp
firewall-cmd --reload

ufw¶

ufw stores all rules persistent, so you just need to execute the commands below.

IPv4:

ufw allow 80/tcp
ufw allow 53/tcp
ufw allow 53/udp
ufw allow 67/tcp
ufw allow 67/udp

IPv6 (include above IPv4 rules):

ufw allow 546:547/udp